The average fuel consumption under working conditions such as stone loading is 24L/h. The efficient and low consumption performance of Shandong Lingong E6375H has brought us considerable operating profits. It can easily handle flat filling and digging
Duan Zong
8 years of equipment operation experience
Working conditions: Zibo Quarry
Equipment: E6375E
The power performance of Shandong Lingong E6375H is very good, with smooth and smooth movements, and better operational efficiency than other equipment on the construction site. The added production capacity brought by it is enough to compensate for the cost increase brought by the fourth national standard. It can handle everything from mining backfilling, slope leveling, to loading and crushing.
Located in the land of Qilu, Zibo Boshan is a mountain city, which is one of the birthplaces of Shandong cuisine and also has a unique cultural and geographical environment. The housing prices here are not high, but the construction difficulty is very high, and high-rise buildings that rise from the ground often require digging mountains to build foundations. The excavation of industrial and civil buildings in plain areas usually only requires a 20t excavator. Facing this complex and hard mountain city, excavation and loading require outstanding 30t+equipment to undertake.
At the age of 41, Duan is always a well-known excavator expert, practical, wise, and full of leadership. He started as a excavator operator and has been a partner and equipment supervisor of a large local construction unit for 8 years. In recent years, he has also participated in multiple government construction projects.
Due to local operating conditions, all 18 excavator equipment under Mr. Duan’s command are 36t and above models. At the beginning of 2023, with the recovery of the market and business expansion, under his proposal, the company successively purchased three Shandong Donglin Industrial and Commercial University tonnage excavators, and he particularly admired the E6375H.
When we were repairing the highway, we used a 50t excavator from Shandong Lingong, which has been of solid quality for several years. So this year, I was the first to think of Shandong Lingong for the fourth equipment in China. This E6375H was originally intended for loading and assisting, but I didn’t expect it to be able to do anything on the construction site. It basically covered loading, slope repair, excavation, and backfilling
The E6375H excavator adopts a temporary independent fully electronic control system, equipped with a 212 ultra large displacement main pump and a 700 B ultra large diameter main valve. It is equipped with top-level electro-hydraulic configuration, and has characteristics such as strong flow capacity, low system pressure loss, and low fuel consumption. Matching 2.1m ³ Super large bucket capacity, with operational efficiency that is difficult to compete with in the same level of equipment.
Since the lifting of the E6375H in March this year, it has been on duty for 600 hours. According to General Manager Duan’s statistics, the stone loading efficiency of the E6375H is 7-8 vehicles per hour, with a maximum loading capacity of 10 vehicles, and an average fuel consumption of about 24 L/h.
From municipal engineering to sand and gravel mining, there are many projects that Mr. Duan is working on at the same time in the local area. The annual operating hours of excavators here are all over 5000h, and high-strength construction poses a severe challenge to both the operators and equipment.
The E6375H has a total weight of 39 tons, specifically designed for mining users, with solid materials and reliable durability. Equipped with heavy-duty boom, mining bucket, and reinforced pull rod as standard, it has a greater load-bearing capacity and a longer service life. The comfort of the entire machine also satisfied Mr. Duan very much. “The E6375H suspension seat sits like a first-class cabin, with good shock absorption effect and can effectively reduce fatigue. The soft and hard configurations of the equipment are high, meeting our mining operation need